Connecting Conveyor
0102030405
Connecting Conveyor BC-050XL-N
01
7 Jan 2019
1. Modularized design, can be optional disassembled and assembled according to customer's demand;
2. With stainless steel side guide rail design;
3. Variable speed control function;
4. With circuit board detection mode;
5. The body is connected by sheet metal bending frame;
6. The bottom plus dust-free counterweight block design, not easy to shift;
7. Parallel smooth ball screws to adjust the width；
8. The length of the machine can be customized according to customer requirements;
9.Transmission motor adopts stepping motor, speed is adjustable;
10. Standard signal: standard SMEMA interface, can be directly connected with other equipment to use.
Technical Parameters
| Content | Parameter |
| Description | This device is used to separate PCB board pitches in insertion lines. |
| Board Size (mm) | 50*50~460*460mm |
| Working height (mm) | 900+20/-20mm, foot cup height adjustment |
| Transfer speed | 0.5-10 meters per minute or as specified by the customer. |
| Power supply | 100V,230V (single-phase AC) |
| Machine size (mm) | 500(L)*787(W)*1800(H) |
| Weight (KG) | 55 |
| Power | Maximum 100 VA |
| Conveyor type | 3mm/4mm anti-static flat belt conveyor optional |
| Conveying direction | Adjustable from left to right or right to left |
| Lighting | LED light optional |
| PCB product weight | ≤3.5KG |
FAQ
Q. What should I do if there is a positive rotation and a negative rotation?
A. Check the wires to see if they're loose.
Q. What if the conveyor belt is clogged or stuck?
A. Adjust conveyor belt tension, straighten out foreign objects on the conveyor belt, replace conveyor belt if necessary.
Q. What should I do if the device is detached or damaged?
A. Adjustment of conveyor vibration parameters, stabilization of air pressure, checking of device quality and replacement of damaged devices.